Bracket, Front Right - Brocade Communications Systems 200E Series Installation Procedure

S il
k W
o rm
4 1
0 0
! IO
IO
I
L N
K
S P
D
1

Bracket, front right

5 Screw, 8-32 x 5/16 in., panhead Phillips
FIGURE 2 Position the front bracket
Installing the switch in the cabinet
Complete the following steps to install the switch in the cabinet.
1. Position the switch in the cabinet
secured to the cabinet.
2. Attach the right front bracket (Item 1) to the right front rack rail using two 10-32 x 5/8 in. screws (Item 7) and
two retainer nuts (Item 8).
3. Repeat step 2 to attach the left front bracket (Item 2) to the left front rack rail.
4. Tighten all 10-32 x 5/8 in. screws (Item 7) to a torque of 25 in.-lbs (29 cm-kgs
8 of 12
scale: 1/8" = 1"
(Figure 3), providing temporary support under the switch until the rail kit is
H T
R I G
B
E V .
2 R 5
0 0
2 -0
3 / 2
4 0
0 2 1 / 0
-0 0 N 0
# 2 O N
X C
F O
Fixed Rack Mount Kit Installation Procedure
53-1001274-02