Correct Handling Of The Battery Charger - Parkside PGSA 4 A2 Translation Of The Original Instructions

GB IE NI
4) RESIDUAL RISkS
Even if properly operating and handling this
electric tool, some residual risks will remain.
Due to its construction and build, this elec-
tric tool may present the following hazards:
a) Cuts
b) Ear damage if working without ear
protection.
c) Eye damage if suitable eye protection
is not worn.
d) Damage to your health caused by
swinging your hands and arms when
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electroma-
gnetic field which, under certain
circumstances, may impair the
functionality of active or passive
medical implants. To reduce the risk
of serious or lethal injuries, we rec-
ommend that persons with medical
implants consult their doctor and the
manufacturer of their medical im-
plant before operating the machine.
Correct handling of the
battery charger
This appliance can be used
by children aged from 8
years and above and per-
sons with reduced physical,
sensory or mental capabi-
lities or lack of experience
and knowledge if they have
been given supervision or
instruction concerning use of
the appliance in a safe way
and understand the hazards
12
CY
involved. Children shall not
play with the appliance.
Cleaning and user mainten-
ance shall not be made by
children without supervision.
a) The charger must only
be connected to a mains
socket via a residual-cur-
rent circuit breaker (RCD)
with a rated leakage
current of not more than
30 mA. fuse: at least 13
ampere.
b) To charge the battery,
use only the charger
supplied. Risk of fire and
explosion. This ensures that
the safety of the device is
maintained.
c) Before each use, check
the charger, cable and
plug and have them re-
paired by qualified pro-
fessionals and only with
original parts. Do not use
a defective charger and
do not open it up yourself.
This ensures that the safety of
the device is maintained.
d) Ensure that the mains
voltage matches the
specifications on the
charger rating plate. Risk
of electric shock.
e) Disconnect the charger
from the mains before
closing or opening con-
nection to the battery /
power tool / device. This
ensures that the battery and
charger are not damaged.