Mitsubishi Electric MR-J3-T Quick Start Manual page 37

Positioning with Digital Inputs
MR Configurator can mon i tor all the inputs and out puts of the MR-J3-T, includ ing those on the
MR-J3-D01 I/O extension.
Pro ce dure:
Con nect the PC/note book to the USB port (CN5) of the servo am pli fier us ing ca ble
MR-J3USBCBL3M.
Star t MR Configurator and make the fol low ing selections:
– Se lect the MR-J3-T se ries am pli fier.
– Se lect the MR-J3-D01 ex pan sion card ("op tion unit").
Fig. 4-20: Set tings in MR Configurator for check ing the MR-J3-T with the MR-J3-D01
After this you can mon i tor the sig nals of the expan sion card with the option Option unit I/F dis play
in the Mon i tor menu.
Fig. 4-21: Se lec tion of the "Op tion unit I/F dis play" ter mi nal mon i tor option
MR-J3-T
ex pan sion card
Functional Test of Digital Input Positioning
4 - 29