Operating The Speed Control - KitchenAid 5KHM9212 Manual

USING YOUR HAND MIXER

OPERATING THE SPEED CONTROL

This KitchenAid Hand Mixer will beat faster and more thoroughly than most other
electric hand mixers. Therefore, the beating time in most recipes must be adjusted to
avoid overbeating. Beating time is faster due to larger beater sizes.
To help determine the ideal beating time, observe the batter or dough and beat only
until it has the desired appearance described in your recipe, such as "smooth and
creamy". To select the best beating speeds, use the "Speed control guide" section.
Touch the "UP (arrow)" button to
increase the mixing speed to the
desired setting. If necessary, touch the
2
"DOWN (arrow)" button to decrease
the mixing speed. See the "Speed
control guide" for more information.
NOTE: The Hand Mixer automatically starts at Speed 1 every time it is turned on,
regardless of the speed setting at the time the mixer is shut off.
W11192938B.indb 9
Plug the Hand Mixer into an
electrical outlet. Slide the Power
switch to the "I" (ON) position. The
1
motor will automatically start at
Speed 1, and the "1" on the speed
indicator control will light up.
When mixing job is finished, slide
the Power switch to the "O" (Off)
3
position. Unplug the Hand Mixer
before removing accessories.
USING YOUR HAND MIXER | 9
2/1/2019 4:46:05 PM