Inspection Of Engine Fuel Quantity; Inspection Of Leakage And Wiring Condition - Mitsubishi Heavy Industries TU1250SAE Operation Manual

Inspection of engine fuel quantity

Use the designated engine fuel.
•
1
Always check the fuel quantity with the
fuel level gauge to avoid running short
of fuel during transportation.
2
If there is not enough fuel left in the
tank, refuel it.
[ Refer to page 69 for designated
fuel.]
NOTE
●
●

Inspection of leakage and wiring condition

1
Check if there is no leakage of cooling water, engine oil or engine fuel
from the tanks, pipes or connecting parts.
2
Check if there is no damage on the wire connected to the battery.
3
If any abnormal conditions are detected, contact your nearest dealer.
CAUTION
- 64 -
Fuel tank
Fuel gauge
1
2
3
4
5
6
7
8
9
1 0