Mitsubishi Heavy Industries TU1250SAE Operation Manual page 22

3 Precaution for safety
• Use 4-core cabtyre cables (conductor
1
2
• Use MENNEKES Part no.6 (400V 32A)
• Pull out the power cord by holding the plug
3
4
• Check the plug of the power cord for dust.
5
• Surely protect the power socket
6
7
• Otherwise, it may cause an electric shock or a fire
8
Do not start and stop the operation with pulling out or
9
inserting the power supply breaker or power cord.
• Otherwise, it may cause troubles of electric circuit, damages of
1 0
cross section with 5mm
power cable. Do not connect it to
extension cord.
( Refer to page 39.)
for power supply plug.
part at the end of the cord.
If there is no dust, insert it firmly.
with a cover when it is not used.
When the cover is damaged, repair
it immediately.
due to the heat, breaking of wire and leaking of
water, etc.
power supply cord or an electric shock.
WARNING
2 or more) for
CAUTION
- 17 -