Mitsubishi Heavy Industries TU1250SAE Operation Manual page 64

1
2
3
4
5
6
7
8
9
1 0
Use 3-phase AC400V 50Hz for power supply.
•
Sufficient care must be taken for foothold when
working at a higher place on a stepladder.
•
When leakage of the refrigerant is detected, contact
your nearest dealer immediately.
•
Stop the operation and wait until engine and others are
cooled down before performing the inspection.
•
Set the "Main switch" to "OFF" to stop the refrigeration
unit and disconnect battery terminals and the power
cord plug during inspection.
•
Apply the parking brake and put chocks under wheels
during inspection.
•
CAUTION
- 59 -