Inspection Of Engine Oil Quantity - Mitsubishi Heavy Industries TU1250SAE Operation Manual

Inspection of engine oil quantity

1
2
(Oil level gauge)
3
4
5
6
7
1
Check if the fluid level of engine oil is in the vicinity of the upper limit of
the oil level gauge.
* Tighten the screw of oil level gauge firmly to check.
8
2
When the quantity of engine oil is not enough, supply the designated
engine oil from the oil inlet to the level not to excess the upper limit.
9 [ Refer to page 69 for the designated engine oil.]
NOTE
● Maintenance required
1 0
Upper limit
Do not perform inspection of the engine oil or refill it
immediately after the engine stopped.
•
Do not refill the engine oil excessively.
•
Use the designated engine oil.
•
Surely wipe off spilled engine oil during refilling.
•
Oil lter
CAUTION
- 63 -
Oil level gauge
Oil inlet