AEG BPE742220B User Manual page 37

Step 1 Turn off the oven and wait until it is
cold.
Step 2 Pull the front of the shelf support
away from the side wall.
Step 3 Pull the rear end of the shelf support
away from the side wall and remove
it.
Step 4 Install the shelf supports in the oppo‐
site sequence.
12.3 How to use: Pyrolytic cleaning
Clean the oven with pyrolytic cleaning.
WARNING!
There is a risk of burns.
Turn off the oven and wait until
it is cold.
Step 1
Turn on the oven.
Option
Quick
Normal
Intense
When the cleaning starts, the oven door is locked and the lamp is off.
To stop the cleaning before it is completed, turn off the oven.
The oven stays locked until it is cold.
Turn off the oven and wait until it
is cold.
Before the pyrolytic cleaning:
Remove all accessories and remova‐
ble shelf supports.
Step 2
Press: Menu / Pyrolysis.
Cleaning mode
Light cleaning
Normal cleaning
Thorough cleaning
When the cleaning ends:
Clean the cavity with a soft cloth.
1
2
CAUTION!
If there are other appliances
installed in the same cabinet, do
not use them at the same time
as this function. It can cause
damage to the oven.
Clean the oven floor and the inner door
glass with warm water, a soft cloth and
a mild detergent.
Step 3
Set the cleaning mode. Press:
Duration
1 h
1 h 30 min
3 h
Remove the residue from the bottom of
the cavity.
.
ENGLISH 37