Cleaning The Pump Filter; Transporting The Line Painter - Toro Line Painter 1200 Operator's Manual

Cleaning the Pump Filter

Remove and clean the paint filter (Fig. 32).
1. Turn the engine off.
2. Using the filter wrench provided, remove the pump
filter cap.
3. Remove the pump filter and clean with water.
4. Install pump filter and cap.
Figure 32
1. Pump filter cap

Transporting the Line Painter

To transport the line painter:
• Set the parking brake and block the wheels.
• Fasten the line painter tie downs (Fig. 33 & 34) to the
trailer or truck with straps, chains, cable, or ropes.
1
Figure 33
1. Rear tie down locations
1
1. Front tie down
1
1
21
Figure 34