Maintenance; Recommended Maintenance Schedule - Toro Line Painter 1200 Operator's Manual

Hide thumbs Also See for Line Painter 1200:
Table of Contents

Advertisement

Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule

Maintenance Service
Interval
Each Use
5 Hours
25 Hours
50 Hours
100 Hours
300 Hours
Storage
1
Change the engine oil after the first 8 operating hours.
Important
Refer to your engine operator's manual for additional maintenance procedures.
If you leave the wire on the spark plug, someone could accidently start the engine and seriously
injure you or other bystanders.
Disconnect the wire from the spark plug before you do any maintenance. Set the wire aside so
that it does not accidently contact the spark plug.
Maintenance Procedure
• Check the engine oil level.
• Check the engine mounting fasteners. Tighten them if they are loose.
• Clean the foam pre-cleaner of the air cleaner.
• Change the engine oil (without the oil filter).
• Check for leaks in the fuel system and/or a deteriorating fuel hose. Replace
parts if necessary.
• Remove any debris from the belts.
• Change the oil filter.
• Inspect the spark plug and replace it if necessary.
• Replace the paper air filter.
• Clean the cooling system; remove any debris or dirt from the engine air cooling
fins and starter. Clean the system more frequently in dirty or high-chaff
conditions.
• Clean the fuel filter.
• Service the wheels.
• Replace the paper air filter. Replace it more frequently in dusty operating
conditions.
• Clean the combustion chamber–see engine manual
• Lap the valves
• Empty the fuel tank before repairs as directed or before storage.
• Refer to the storage procedures in the back of this manual.
Caution
22
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

42004

Table of Contents