Table of Contents
Advertisement
Specifications
Note: Specifications and design subject to change without notice.
General Specifications
Engine
Transaxle
Wheels
Frame
Controls/Gauges
Walking Speeds
Ground Pressure
Flush System
Pump
Nozzle
Paint Pre–Mix
Fresh Water Rinse
Paint Tank
Attachments/Accessories
Kawasaki, 6 hp (4.5 kW), 180 cc, dual–element air cleaner. 1 gallon (3.8 l) fuel
tank.
3–speed gear–drive with neutral and reverse.
Front: 10 x 3.5" (25.4 x 8.9 cm), pneumatic: Rear: 13.5 x 5" @34.3 x 12.7 cm),
pneumatic. Pressure: 12–15 psi rear tires and 18–20 psi in front castor wheel.
Welded sheet steel and tube construction, integral trailer tie–downs.
On/off ignition key switch, 3–speed transaxle shift lever with neutral and reverse,
traction drive lever. spray on/off lever, flush/paint lever, parking brake lever, caster
unlock lever.
1st gear: 1 mph (1.6 km/h); 2nd gear: 2.2 mph (3.5 km/h); 3rd gear, transport: 4
mph (6.4 km/h); Reverse: 1 mph (1.6 km/h).
Less than 15 psi (1.0 bar).
Express Clean System.
Belt–driven five chamber diaphragm with welded diaphragm reinforcing shield.
Flow: 4.5 gpm (I7 liters/min) free–flow, 4 gpm (15 liters/min) @ 30 psi (2.1 bar).
Operating pressure range: 20–40 psi (1.4–2.8 bar), 55 psi (3.8 bar) full bypass.
Excess spray flow returns to tank for paint agitation.
Double fan pattern, 2–6" (5.1–15.2 cm) wide.
Dilute with water to suit the application.
On board system, tank capacity: 2 gallons (7.6 liters). Capable of 4 rinse cycles per
fill/tank.
Roto–molded polyethylene construction, 12 gallon (45 liter) Capacity, 18 mesh
strainer basket, drain valve located high enough to discharge into a standard 5
gallon (19 l) pail.
On–board storage container, selection of spray nozzles.
7
Advertisement
Table of Contents
