Data Transfer Test - Ebyte NA111-A User Manual

Hide thumbs Also See for NA111-A:

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd.

The default target IP

The default destination

port

Serial port rate

Serial parameters

2.3.3 Data transfer test

After the above steps, follow the device factory default parameters, do the following, to achieve

data transmission testing.

Here's how:

（1） Open the test TCP/IP debug assistant software.

（2） The network setup selects the TCP client mode, which corresponds to the server IP

address (module default target IP: 192.168.3.3). The server port number corresponds to the module

setting port 8887(module default port: 8887),clickCreate .

（3） Wait for the computer to connect to the serial server, and the M0 (green LED lights

up)of the serial server when the connection iscomplete.

192.168.3.3

8888

115200

None / 8 / 1

NA111-A User Manual

Table of Contents