Product Features; Introduction To The Basic Features; Web Configuration; Subnet Mask/Ip Address - Ebyte NA111-A User Manual

Hide thumbs Also See for NA111-A:

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd.

4. Product features

The device has a built-in web server that allows users to set and query parameters through web

pages.

The port of the Web server is customizable, with a default of80

How to do this:

 Open the browser, the address bar to enter the IP address of the device, example

192.168.3.7 (IP address and computer need to maintain the same network segment),forget

that native IP can be queried through the AT instructions and configuration software.

 The main screen pops up to query the settings.

You can also open it by configuring the open web page configuration button of the software.

Note: If you modify the port number, the address input bar should add the port number, for

example, modify the page access port is 8080,the connection page configuration needs to enter

192.168.3.7:8080in theaddress bar.

The IP address is the identification of the module in the local area network, which is unique in

the local area network. Therefore, it cannot be duplicated with other devices on the same LAN. The

IP addresses of the modules are static IP and DHCP.

（1） Static IP:

Static IP is a scenario that requires users to set up manually, with attention to

writing IP, subnet mask, and gateway at the same time, and static IP for scenarios that need to be

counted on IP and devices and that correspond one by one.

Pros: Access devices that cannot assign IP addresses can be searched through the network-wide

broadcast mode, making it easy to manage them uniformly

Cons: Different LAN intranet segments are different, resulting in no normal TCP/UDP

communication.

（2） Dynamic DHCP: The main function of DHCP is to obtain information such as IP address,

gateway address, DNS server address, etc. dynamically from the gateway host, thus eliminating

NA111-A User Manual

Table of Contents