Advanced Features; Heartbeat Package Function; Register The Package Feature - Ebyte NA111-A User Manual

Hide thumbs Also See for NA111-A:

Table of Contents

Chengdu Ebyte Electronic Technology Co.,Ltd.

4.4 Advanced features

In network transmission mode, users can choose to send a heartbeat package and customize the

heartbeat time. Heartbeat Package supports network heartbeat package, serial heartbeat package.

Heartbeat package sending mode:

（1） The default is to turn off heartbeat mode.

（2） Serial mode - > Device Sends heartbeat content to the serial bus at a set heartbeat

interval.

（3） Gate Mode - > Device Send heartbeat content to the gate bus at a set heartbeat interval.

Custom heartbeat content (up to 38 bytes (ASCII) data, 19 bytes (HEX)data).

Custom heartbeat package send time interval, set to 0 to turn off the heartbeat function, set the

value greater than zero to turn on the heartbeat function, open can set the range:(1-65536)seconds,

the default value is 0.

In network transmission mode, users can choose to send the registration package and customize

the registration package time.

The registration package supports the following modes:

（1） Send a MAC address(OLMAC)when the network establishes a connection tothe device

（2） Send custom enrollment package data(OLCSTM)when the network establishes a

connection tothe device

（3） When the network is connected to the device, each packet of data that the device sends

to the network is preceded by a MAC address (EMBMAC).

（4） Once the network is connected to the device, each package of data that the device sends

to the network is preceded by custom enrollment package data(EMBCSTM).

Custom registration package content (up to 38 bytes (ASCII) data,18 bytes (H EX)data).

Note: Web page configuration does not work properly using connections to send MAC and

connections to send custom registration package modes.

NA111-A User Manual

Table of Contents