Administration Windows; Users Window - Cisco CIVS-IPC-2500 User Manual

Chapter 3 Configuring and Managing the IP Camera
To remove a user, click Delete next to the user. If you delete a user who is logged into the IP camera,
•
the user remains logged in and can continue access the IP camera.
To discard the changes before you click Change or Save, click Cancel.
•
The Save and Cancel buttons appear at the bottom of the window. You may need to scroll down to
•
see them.
Table 3-5
Table 3-5
Option
Administrator
User ID
User name
Password
Confirm Password
User List
User ID
User Name 1 – 20
Password
Confirm Password
Privilege Level
OL-14220-01
describes the options in the Users window.
Users Window Options
Description
Display only. The user ID for the IP camera administrator is Admin.
The administrator can access the configuration windows for the IP camera,
control all IP camera functions, view video from the IP camera, and access
the Administrator windows
Display only. The user name for the IP camera administrator is admin (all
lower case).
Enter a password for the IP camera administrator.
The password must contain least 8 characters, which can be letters, numbers,
and special characters, but no spaces. It is case sensitive.
Note You can also set this password and configure other requirements for
it in the Initialization window as described in the
Window" section on page
Re-enter the password for the administrator.
Display only. There are 20 default user IDs, User 1 through User 20.
Enter a unique name for the user.
The name can include up to 32 letters and numbers. It is case sensitive.
Enter a password for the user.
The password is case sensitive and must contain at least 8 characters, which
can be letters, numbers, and special characters, but no spaces. Special
characters are: ! " # $ % & ' ( ) * + , - . : ; < = > ? @ [ \ ] ^ _ ` { | } ~.
Re-enter the password for the user.
Select the desired privilege level for the user:
• Administrator—Same as the IP camera administrator. Allows the user
to access the configuration windows for the IP camera, view video in the
Home window, and access all controls in the Home window.
Monitor—Allows the user to view video in the Home window and to
•
access all controls in the Home window.
Viewer—Allows the user to view video in the Home window and to
•
access these controls in the Home window: resolution, digital zoom,
snapshot, speaker on/off, speaker volume, microphone on/off,
microphone volume.
3-19.
Cisco Video Surveillance System IP Camera User Guide

Administration Windows

"Initialization
3-11