Home Window Controls - Cisco CIVS-IPC-2500 User Manual

Chapter 4 Viewing and Live Video

Home Window Controls

The Home window provides controls for several IP camera features.
the Home window.
The IP camera administrator and users with the administrator or monitor privilege can access all IP
Note
camera, video display, and audio controls. Users with the viewer privilege can access video display and
audio controls only.
Table 4-1
Control
IP camera controls
On button
Off button
Preset Camera
View drop-down
list
Patrol Sequence
button
Zoom Out button Use these buttons to control optical zooming.
Zoom In button
OL-14220-01
Home Window Controls
Description
Changes the state of the designated IP camera output port (1 or 2) as defined by the
Definition Mappings option in the I/O Ports window.
For information about the Definition Mappings option, see the
Window" section on page
Changes the state of the designated IP camera output port (1 or 2) as defined by the
Definition Mappings option in the I/O Ports window.
For information about the Definition Mappings option, see the
Window" section on page
When you choose a preset position from this list, the camera immediately goes to
that preset position.
If the camera is executing a patrol sequence, choosing a preset position from this
list cancels the sequence.
This button appears only if you enabled external PTZ for the camera. For
information about enabling external PTZ and configuring preset positions, see the
"PTZ (RS-485) Window" section on page
Click this button to execute the sequence that is configured for this IP camera.
For information about configuring a sequence, see the
section on page 3-28.
The optical zoom function requires that the IP camera be installed with a motorized
zoom/focus lens in a pan/tilt mount that supports the Pelco D protocol and that PTZ
functions are enabled. For more information, see the
section on page 3-28.
Viewing Video through the Home Window Overview
Table 4-1
3-27.
3-27.
3-28.
Cisco Video Surveillance System IP Camera User Guide
describes the controls in
"Alarm I/O Ports
"Alarm I/O Ports
"PTZ (RS-485) Window"
"PTZ (RS-485) Window"
4-3