Walgreens WGNBPA-750 Manual page 23

Using Triple Check Measurement:
1. P lease make sure the Triple Check measurement switch,
located on the back of the unit, is in the ON position.
2. Press the User-Select button. After the user number
is selected, press the Start/Stop button to confirm the
chosen user.
3. With the cuff wrapped around your arm, press the Start/
Stop button. Do not inflate the cuff unless it is wrapped
around your arm. All digits will light up to check the
display functions. The checking procedure will be
completed after about 3 seconds.
Note:
If the Rest Assure feature is ON, the 5 minute countdown
will begin after checking procedure is complete.
4. After all symbols disappear, the display will show
"00". The monitor is "Ready to Measure" and will
automatically inflate the cuff to begin measurement.
The cuff will begin deflating as measurement continues.
Note:
This monitor will reinflate automatically if the system
detects that your body requires more pressure for
measurement.
IB-WGNBPA-750--03.indd 22
Triple Check Rest Assure
ON OFF AM/PM ON
Date Link
22
OFF
2012/7/24 上午 9:43