Walgreens WGNBPA-750 Manual page 21

Using Single Measurement Mode:
1. P lease make sure the Triple Check measurement switch,
located on the back of the unit, is in the OFF position.
2. P ress the User-Select button to choose User 1 or User 2.
After the user number is selected, press the START/STOP
button to confirm the chosen user.
3. W ith the cuff wrapped around your arm, press the START/
STOP button. Do not inflate the cuff unless it is wrapped
around your arm. All digits will light up to check the display
functions. The checking procedure will be completed after
about 3 seconds.
Pulse
/min.
MEM
Note:
If the Rest Assure feature is ON, the 5 minute countdown will begin
after the checking procedure is complete.
IB-WGNBPA-750--03.indd 20
Pulse
/min.
START
USER
MEM
1/2 STOP
SYS.
mmHg
DIA.
mmHg
START
USER
STOP
1/2
SYS.
mmHg
DIA.
mmHg
20
2012/7/24 上午 9:43