Table of Contents
Advertisement
Diagnostics
an intentional error as check on the error detector when run-
ning a self test.
[3] Reset Counters clears both the Bit Errors
count and the Test Duration.
[0] Return to Main Menu
1
[1] Stop Test
[2] Inject Single Bit Error (ST only)
[3] Reset Counters
Current Test:
Test Status:
Test Duration:
Bit Errors:
Next Selection:
1
displays "Restart Test" when Test Status is "Stopped"
2
displays name of test selected from Diagnostic Selection screen;
identifies Network Line Loopback and DTE Local Loopback
tests as either Unilateral or Bilateral
3
or "Stopped"
4
or "NO SYNC"; displays only while a Self Test is selected
Figure 4-3 Diagnostics Results Screen
DT T1 Diagnostics
Network QRSS Self Test
Running
x minutes, y seconds
0000 e00
GDC 048R154-000
4-7
2
3
4
Advertisement
Table of Contents
