General DataComm DeskTop T1 Installation And Operation Instruction Manual page 37

Operation
through its potential settings.
3. When the desired setting is displayed, press Enter. The changed
setting goes into effect immediately.
4. Repeat steps 1 through 3 for each option you need to change.
5. After you've made all required changes, type selection 0, Return
to Main Menu.
Table 3-1, which starts below, lists the configuration options that
appear on the terminal interface display and all the settings available
for each. For more detailed descriptions of the individual option
settings and their effects on operation of the DSU you can consult
Tables 2-1 through 2-5 in Chapter 2, Installation.
Table 3-1
DeskTop T1 Configuration Option Settings
Option
[0] Return to Main Menu
[1] Network Framing:
[2] Network Coding:
[3] Network Line Type:
* The setting of hardware switch S13-1 determines the Hard Mode/Soft Mode status
that is displayed with the Return to Main Menu selection. This screen is display-
only when the unit is in Hard Mode.
Potential Settings
Unit is under Software Control*
Unit is under Hardware Control*
ESF
D4
Unframed
Auto
B8ZS
AMI
DS-1
DSX-1
(Continued on next page)
3-5
GDC 048R154-000