Stored Faults - Comtech EF Data UT-4518E-1 Installation And Operation Manual

UT4500 Series Up Converter
System Operation
3.3.5.3 S
YNTHESIZER
Displays the synthesizer faults:
Sum Loop Detect.
!
Coarse Loop Detect.
!
Fine Loop Detect.
!
3.3.5.4 C
ONVERTER
Displays a converter temperature fault condition.
3.3.6 S F
TORED
The converter displays a total of one hundred (100) faults which are date and time
stamped and stored in memory as they occur. The stored faults remain in memory until a
clear command is entered. When the number of faults reaches 100, the 100
display ER.
3.3.6.1 T S
OTAL TORED
Displays the total number of faults stored. The most recent fault stored is displayed on
the LCD display.
3.3.6.2 C A
LEAR LL
Input command to clear all faults. The command is "YES" or "NO' which is displayed on
the LCD display.
3.3.6.3 D S
ISPLAY
The local operator can sequence through the stored faults starting with the most recent
fault. The fault number, time, description and date is displayed on the LCD display.
F
AULTS
O T
VER EMPERATURE
AULTS
F
AULTS
S F
TORED AULTS
F
TORED AULT
F
AULT
36
MN/UT4500.IOM
Rev. 0
th
fault will