Monitor & Control; Installation, Operation And Maintenance - Comtech EF Data UT-4518E-1 Installation And Operation Manual

UT4500 Series Up Converter
Theory of Operation
C.3 M
ONITOR
The Monitor & Control Assembly is designed to monitor the functions of the converter,
and provide the control for remote and local command inputs to the converter. Remote
control inputs are provided through the EIA-232C or EIA-485 communications port on
the rear of the panel, or by local operator inputs through the key-pad on the front panel.
Local operator input commands and the status of the converter are displayed on the LCD
display on the front panel.
A converter fault is indicated by the LED indicator on the front panel. Specific fault
conditions are displayed on the LCD display through local key-pad input commands.
C.4 I
NSTALLATION
Refer to Chapter 1 for a functional description of the converter interfaces.
Refer to Chapter 2 for converter installation and mounting instructions.
Refer to Chapter 3 for converter operating instructions and procedures.
Refer to Appendix A for redundant system operating instructions and procedures.
Refer to Appendix B for converter remote control operating instructions and procedures.
Refer to Appendix D for converter maintenance and troubleshooting procedures.
& C
ONTROL
, O
PERATION AND
M
AINTENANCE
82
MN/UT4500.IOM
Rev. 0