About This Manual; Conventions And References; Metric Conversion; Recommended Standard Designations - Comtech EF Data UT-4518E-1 Installation And Operation Manual

UT4500 Series Up Converter
Preface
A M
BOUT THIS ANUAL
This manual provides installation and operation information for the Comtech EF Data
UT4500 Series Up Converter. This is a technical document intended for earth station
engineers, technicians, and operators responsible for the operation and maintenance of
the UT4500 Series Up Converter.
C
ONVENTIONS AND
C W
AUTIONS AND
Indicates information critical for proper equipment function.
IMPORTANT
Indicates a hazardous situation that, if not avoided, may result in minor or moderate
injury. CAUTION may also be used to indicate other unsafe practices or risks of
property damage.
CAUTION
Indicates a potentially hazardous situation that, if not avoided, could result in
death or serious injury.
WARNING
M C
ETRIC ONVERSION
Metric conversion information is located on the inside back cover of this manual. This
information is provided to assist the operator in cross-referencing English to Metric
conversions.
R
ECOMMENDED
Recommended Standard (RS) Designations have been superseded by the new designation
of the Electronic Industries Association (EIA). References to the old designations are
shown only when depicting actual text displayed on the screen of the unit (EIA-232, EIA-
485, etc.). All other references in the manual will be shown with the EIA designations
(EIA-232, EIA-485, etc.) only.
T
RADEMARKS
All product names mentioned in this manual may be trademarks or registered trademarks
of their respective companies and are hereby acknowledged.
R
EFERENCES
ARNINGS
S D
TANDARD ESIGNATIONS
ix
MN/UT4500.IOM
Rev. 0