Download Print this page
Prince Castle DHB2PT-30 Operating Instructions Manual

Prince Castle DHB2PT-30 Operating Instructions Manual

Dedicated holding bin

Advertisement

Quick Links

OPERATING
INSTRUCTIONS
Dedicated Holding Bin
Model No. DHB2PT-30
DHB4PT-30 & DHB4-30
DHB2PT-30
DHB4-30 (Non Pass Through)
ELECTRICAL SPECIFICATION
Model
Volts
DHB2-30
208
DHB2-30L
120
DHB2-30J
200
DHB2PT-30
208
DHB2PT-30L
120
DHB2PT-30J
200
DHB2PT-30CE
220-240
DHB2PT-30GB
240
DHB4PT-30
208
DHB4PT-30J
200
DHB4PT-30CE
220-240
DHB4PT-30GB
240
DHB4-30
208
DHB4-30J
200
DHB4-30CE
220-240
DHB4-30GB
240
545-502revB
DHB4PT-30
HZ
Watts Amps
60
1800
8.6
60
1650
13.8
50/ 60
1650
8.3
60
1800
8.7
60
1650
13.8
50/60
1650
8.3
50
1900
7.9
50
1900
7.9
60
3600
17.3
50/60
3400
17.0
50
3800
16.0
50
3800
16.0
60
3600
17.3
50/60
3400
17.0
50
3800
16.0
50
3800
16.0
355 East Kehoe Blvd.
Tel: (630) 462-8800
Toll Free: 1-800-PCASTLE

TABLE OF CONTENTS

Installation ..................................................................... 2
Programming .............................................................. 2-3
Operating ....................................................................... 4
Cleaning ........................................................................ 4
Parts List ....................................................................... 4
Exploded View .............................................................. 5
Troubleshooting ............................................................ 6
Wiring Diagrams ........................................................... 7
LIMITED WARRANTY
This product is warranted to be free from defects in material
and/or workmanship for a period of 1 year from date of original
installation, not to exceed 18 months from the date of
manufacture.
Any component which proves to be faulty in material and/or
workmanship will be replaced or repaired (at the option of
Prince Castle, Inc.) without cost to the customer for parts and
labor. This warranty covers on-location service (i.e. trip
charges and/or mileage). Travel mileage is limited to 100 miles
(200 Kilometers) round trip (one trip warranty) from an
authorized service agency or its sub-service agency.
This warranty is subject to the following exceptions/conditions:
• Use of any non-genuine Prince Castle parts voids this
warranty.
• All labor to be performed during regular work hours.
Overtime premium (the incremental amount) will be charged
to the customer.
• Damage caused by carelessness, neglect and/or abuse
(e.g., dropping, tampering or altering parts, equipment
damaged in shipment, by fire, flood or an act of God) is not
covered under this warranty.
• All problems due to operation at voltages other than that
specified on equipment nameplates are not covered by this
warranty. Conversion to correct voltage is the customer's
responsibility.
• This equipment must be serviced by Prince Castle
Authorized Service Agency or a Prince Castle Service
Technician during the warranty period.
Carol Stream, IL 60188
Fax: (630) 462-1460
PAGE
Printed in USA 1/06 © 2006

Advertisement

loading

Summary of Contents for Prince Castle DHB2PT-30

  • Page 1: Table Of Contents

    Any component which proves to be faulty in material and/or workmanship will be replaced or repaired (at the option of Prince Castle, Inc.) without cost to the customer for parts and labor. This warranty covers on-location service (i.e. trip DHB4-30 (Non Pass Through) charges and/or mileage).
  • Page 2: Installation

    The SET POINT LED indicator will be on INSTALLATION when the Set-point mode is selected. Press and hold the Prince Castle button then press and hold the SET-POINT button to program 1. After you have removed the unit from the carton, the temperature for the selected heater inspect the unit for signs of damage.
  • Page 3 2. Press and hold the SET POINT button then 2. Press the timer button to change. The timer press and hold the PRINCE CASTLE button for 6 button LED will change to yellow and the current seconds. The LED indicator next to PROG will programmed time is displayed.
  • Page 4: Operating

    4. To cancel an active timer, quickly press the timer DHB4-30) button three times. 72-342S Power Cord (DHB2PT-30) 5. To adjust the alarm sound volume, press and hold the PROG button then press the UP button. 548-050 Cover, Side (DHB2PT-30)
  • Page 5: Exploded View

    545-502revB Printed in USA 1/06 © 2006...
  • Page 6: Troubleshooting

    TROUBLESHOOTING Problem Cause Solution A. Display flashes Open relay. Replace Power Circuit Board “Opn” & “rEL” Circuit inoperable B. Display flashes Shorted relay. Replace Power Circuit Board. “SHr” & “rEL” Circuit inoperable. Open heater. Test heater resistance.(150.2 Ohms) Replace Heater Power and Main Circuit Boards.
  • Page 7: Wiring Diagrams

    LOWER LOWER "C" P2 P1 HEATER TIMERS 7-12 CONTROLLER THERMOCOUPLE UPPER "d" HEATER THERMOCOUPLE LOWER "d" ORG OR YEL HEATER WIRING DIAGRAM (DHB2PT-30 & DHB2-30) SPEAKER SPEAKER CONTROLLER DISPLAY RIBBON THERMOCOUPLE UPPER "A" HEATER THERMOCOUPLE POWER SWITCH LOWER "A" HEATER...

This manual is also suitable for:

Dhb4pt-30Dhb4-30Dhb2-30Dhb2-30lDhb2-30jDhb2pt-30l ... Show all