Table of Contents
Advertisement
Cleaning your fireplace
WARNING
Risk of severe burns! Surfaces of the
fi replace are very hot during operation.
Ensure fi replace has cooled off before
touching it.
Remove the window for cleaning
1.
Bottom cover:
If using a bottom cover, pull it out
to unhook it.
Fret:
If using a fret, unhook it and unhook its sup-
port brackets.
2.
Screen and Window cover:
to the window cover which, in turn, is hooked to
the fi replace at the top and attached with mag-
nets at the bottom. Grabbing both the screen
and window cover, pull the bottom to detach the
magnets and unhook the top. Set aside in a safe
place to avoid damage.
The screen is hooked
3.
Glass window:
Rotate the four fastening window
bolts on each side and at the bottom of the win-
dow, turning 90 degrees, right or left, to release
them. The bolt contains a pin which must pass
through a slot in the retaining tab.
4. Set the window in a safe place to avoid damage.
x 4
13
Advertisement
Table of Contents
