5.0
BIOS SETTING
5.1
Enter The BIOS
Power on the computer, and the system will start POST (Power On Self Test) process.
When the message below appears on the screen, press the (DEL) key to enter Setup.
Press DEL to enter SETUP.
If the message disappears before you respond and you still wish to enter Setup, restart
the system by turning it OFF and On or pressing the RESET button. You may also restart
the system by simultaneously pressing <Ctrl>, <Alt>, and <Delete> keys.
Important
The items under each BIOS category described in this chapter are continuously
updated for better system performance. Therefore, the description may differ
slightly from the latest BIOS and should be held for reference only.
Upon boot‐up, the 1st line appearing after the memory count is the BIOS version. It
is usually in the format.
Control Keys
Power on the computer, and the system will start POST (Power On Self Test) process.
When the message below appears on the screen, press the (DEL) key to enter Setup.
Move to the previous item.
<↑>
Move to the next item.
<↓>
Move to the item in the left hand.
<←>
Move to the item in the right hand.
<→>
<Enter> Select the item
<Esc>
Jumps to the Exit menu or returns to the main menu from a submenu
<+/PU> Increase the numeric value or make changes
<‐/PD> Decrease the numeric value or make changes
<F1>
General Help
<F3>
Load Optimized Defaults
<F4>
Save all the CMOS changes and exit
User Manual
56