Table of Contents
Advertisement
MAKING A SAMPLE CAMERA RECORDING
1.
2.
Connect the POWER SOURCE.
(See pages 4 and
5.)
Press "EJECT"
Button and insert the cassette so
the transparent window
is toward
you and the
arrow
toward
the
Cassette
Holder.
Slide
the
Cassette into Cassette Holder as far as it will go.
NOTE:
If the power source is not connected to
Camera/Recorder,
the Cassette
Holder will not
open.
. Press the Cassette Holder.
The Holder will latch in
the operating position.
"EJECT"
Button
Cassette
Holder
. Set "VIDEO/CAM"
Select Switch to "CAM"
position.
. Press "POWER" ON/OFF Button on. The Video
Camera/Recorder
will enter
record/pause
mode
automatically.
:
NOTE: If the erase prevention tab on the cassette is
removed,
the
Camera/Recorder
will
not
enter
record/pause mode and recording is not possible.
"VIDEO/CAM"
Select Switch
"POWER"
ON/OFF
Button
theads may be damaged:
6. Set "IRIS" Control to "AUTO".
7. Set."FOCUS AUTO/MAN"
Switch to "AUTO".
NOTE:
See page 22 for "EYEPIECE
ADJUST-
MENT".
"FOCUS AUTO/MAN"
Switch
fé O
f
9a
ick
oO.
"IRIS" Control
. Now,
press
Record
Start/Stop
Button
to start
shooting the picture.
"REC" indication appears in
the viewfinder and you are now recording the pic-
ture you see through the Electronic Viewfinder.
. Press Record Start/Stop Button to stop recording.
Press the Button again to resume recording.
The
"REC" indication in the Electronic Viewfinder goes
off in the record/pause (stand-by) mode.
NOTE: Do not leave the Camera/ Recorder in this.
mode for a prolonged period of time, or the video'
Record Start/Stop Button
Advertisement
Table of Contents
