Charging Time; Safety Instructions; Symbols And Icons - Parkside PAEXS 20-Li B2 Translation Of The Original Instructions

GB IE
Warning: The vibration and noise
emissions may deviate from the
specified values during actual use
of the power tool, depending on
how the power tool is being used
and, in particular, what kind of ma-
terial is being worked on.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
exposure are the wearing of gloves
when using the tool and limiting the
working hours. All parts of the op-
erating cycle have to be considered
while doing so (for example, times
when the power tool is switched off
and times when it is switched on
but running without any load).

Charging time

(min)
PLG 20 A1
PLG 20 A4
PLG 20 C1
PLG 20 A2
PLG 20 A3
PLG 20 C3
PDSLG 20 A1
Smart
PLGS 2012 A1

Safety instructions

Ensure that the safety instructions are ob-
served when operating the appliance.

Symbols and icons

Symbols on the appliance:
This device is part of the
Parkside X 20 V TEAM series
6
PAP 20 A1
PAP 20 A2
PAP 20 B1
60 90
45 60
35 45
35 45
35 40
Charging time
The device is part of the Parkside X 20 V
TEAM series and can be operated with
batteries of the Parkside X 20 V TEAM
series.
Batteries of the Parkside X 20 V TEAM
series may only be charged using chargers
of the Parkside X 20 V TEAM series.
We recommend that you operate this ap-
pliance with the following batteries only:
PAP 20 B1, PAP 20 B3.
We recommend charging these batteries
with the following chargers: PLG 20 A3,
PLG 20 A4, PLG 20 C1, PLG 20 C3,
PDSLG 20 A1.
An up-to-date list of battery compatibility
can be found at: www.lidl.de/akku
PAP 20 A3
Smart
PAP 20 B3 PAPS 204 A1
120 120
80
60
60
40
Attention!
Carefully read these operating in-
structions.
Wear ear protection.
Wear eye protection.
Wear respiratory protection.
Wear safety gloves.
Smart
PAPS 208 A1
210
80 165
50 120
50 120
40 50