Table of Contents
Advertisement
1
Description, application and working principle
1.1
Description
WARNING:
This manual is intended to give Important Information that must be followed
during Storage, Transportation, Installation, Operation and Maintenance of the Pump-Set.
We therefore recommend that this manual is read carefully before the Pump-Set is put into
operation. To prevent damage being caused by inappropriate or incorrect use, or by being
used outside the normal operating parameters of the Pump-set, the Instructions in this
manual must be followed. Failure to do so may lead to damage to or premature failure of the
Pump-set and may cause Injury. Any such actions will invalidate the warranty
The PT series piston pumps have been designed for vertical and horizontal dewatering applications.
These high efficiency positive displacement pumps are self-priming and suitable for pumping a mix of
water and air under any conditions. Furthermore, these pumps can run dry without damage or excessive
wear to any part of the unit. The data sheet that accompanies the pump includes all data for the pump
unit. Before the pump unit is connected, an assessment must always be made to determine whether it
is suitable for the intended application.
1.2
Construction of the pump unit
1. Electro motor
2. Pressure side
3. Suction side
4. Pump housing
5. Protection screen (depending on pump version)
6. Drive
7. Stone catcher
1.3
Intended use
The PT series piston pump is only intended for pumping water from filters or drainage
hose(s), NOT for pumping dirty water drawn directly from the suction hose, with or without a strainer.
.
3
Advertisement
Table of Contents
