Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for UPRENT impulse MUMBAI IP Series
Summary of Contents for UPRENT impulse MUMBAI IP Series
- Page 1 P U M P I N G A N D E N E R G Y S O L U T I O N S PUMP USER MANUAL www.uprent.eu...
- Page 2 Electric piston pump on the frame Technical specification: Intended use To lower the groundwater level Impulse / Mumbai IP – 175 Make / Type Maximal flow 95 m3 / h Maximal head 20 mwc Maximal suction lift 9,5m Suction connection 4’’...
- Page 3 OPERATION- AND SAFETY REGULATIONS MUMBAI IP – 175...
-
Page 4: Table Of Contents
Contents Description, application and working principle ..........3 Description ...................... 3 Construction of the pump unit ..............3 Intended use ....................3 Unintended use....................4 Specification and dimensions ............... 5 Safety instruction ....................6 Warning stickers..................... 6 Lifting instructions Mumbai IP – 175 pump unit ..........8 Moving the pump unit with a forklift ............. -
Page 5: Description, Application And Working Principle
Description, application and working principle Description WARNING: This manual is intended to give Important Information that must be followed during Storage, Transportation, Installation, Operation and Maintenance of the Pump- Set. We therefore recommend that this manual is read carefully before the Pump-Set is put into operation. -
Page 6: Unintended Use
Long fibres will cause immediate malfunctions. The maximum permissible particle size is 5 Contamination results in accelerated wear of the gland packing, gaskets, valve seals, cylinder sleeves and piston cups. Unintended use − It is not permitted to use the pump unit for pumping salt water. −... -
Page 7: Specification And Dimensions
Specification and dimensions Pump specifications: Type ........Mumbai IP - 175 Max. flow ......95 m3/hour Max. pressure ....20 mwc Max. suction lift ....9.5 mwc Connections ...... 4" Dry weight ......1325 kg Dimensions L x W x H ..2000 x 800 x 1000 mm Basic frame ...... -
Page 8: Safety Instruction
Safety instruction This manual contains warning and safety symbols. Do not ignore the instructions. They are provided for the benefit of your health and safety and to prevent damage to the environment and the pump unit. DANGER When the danger symbol with the text DANGER is shown, it is accompanied by information that is of great importance for the safety of everyone concerned. - Page 9 Label for the transport of hazardous materials (hazardous goods) in accordance with the safety standard for the transport of hazardous goods. The UN 1202 class 3 placard indicates the presence of gas oil, diesel fuel or light heating oil. Diesel is hazardous to the environment, with substantial remediation costs if it leaks into a drain, waterway or the ground.
-
Page 10: Lifting Instructions Mumbai Ip - 175 Pump Unit
Lifting instructions Mumbai IP – 175 pump unit DANGER Never walk under a raised load. This can result in a life-threatening situation. WARNING Always disconnect all external connections before moving the pump unit. WARNING Neither the lifting eye on the engine nor the lifting eye of the (bare shaft) pump may be used for transport of the pump unit. -
Page 11: Moving The Pump Unit With A Forklift
DANGER The standard lifting eyes on Impulse pump units, both in low-noise enclosure and open frame, are NOT designed to lift the additional weight of trailers or other components. It is strictly forbidden to use the standard lifting provision to lift or move the pump units with a higher total weight than stated in the specification sheets. -
Page 12: Pump Unit Installation
Pump unit installation WARNING Failure to follow the guidelines for the placement and installation of the pump can result in danger to the user and/or severe damage to the pump unit. Note Impulse is not responsible for accidents and damage that result from failure to follow the guidelines in this manual. -
Page 13: How To Fill The Pump Housing With Water
How to fill the pump housing with water 1. .Make shore all draining valves are closed. 2. Fill fully stone catcher with water, through suction side connector it is easier do connecting D100 F/M 90 degree connector (1) Control panel Impulse Mumbai is supplied with a star-delta switch, it has three positions: Neutral (1), Star (2) and Delta (3). -
Page 14: Checking The Direction Of Rotation And How To Change It
Checking the direction of rotation and how to change it WARNING This test may only be performed by authorized personnel with the appropriate training. To check the direction of rotation the motor must be switched on briefly. The motor must not be allowed to reach the normal operating speed. -
Page 15: Daily Maintenance Of The Pump
Daily maintenance of the pump − Check the oil level in drive unit (1) Note If the oil in the pump drive has become whitish in colour, replace the oil. The whitish colour may indicate the presence of excessive condensation water in the oil. −... -
Page 17: Preperation For Starting
Preperation for starting 1. Take any necessary measures to ensure that the electrical connections and cables cannot be damaged. 2. The voltage and frequency must be checked in advance and must match the motor specifications. This data is shown on the type plate of the motor. 3. -
Page 18: Starting
Starting 1. To start the pump, make shore main switch is on “0” position (1) the switch must first be turned to the star (2) position, and then turned to the delta (3) position within one second. 2. switch must first be turned to the star (2) position for about 1 second. 3. -
Page 19: Stopping
Stopping To stop the motor, the switch must first be turned from Delta position (3) to the star (2) position, and then turned to the neutral position (1) within one second. Note When you suspect that the liquid is beginning to freeze, drain the pump while the medium is still in the liquid state. -
Page 20: Monitoring During Operation
Monitoring during operation 1. During operation check the pump regularly for correct functioning, smooth and vibration-free running abnormal noises and leaks. 2. If the pump has pumped for a long time without having moved water, the pump housing must be filled with water, because the cups are dry after having run dry for a long time. 3. -
Page 21: 10 Draining The Pump When There Is Danger Of Freezing
10 Draining the pump when there is danger of freezing WARNING If there is a danger of freezing, a pump used to pump a liquid that may freeze must be drained (while at a standstill). 1. Turn off motor before drainage. 2. -
Page 22: 11 Troubleshooting Table
11 Troubleshooting table WARNING In the event of a malfunction or abnormal operation, shut off the pump immediately to prevent a dangerous situation and/or damage to the unit. Malfunction Probable cause Diagnose Possible solution Insufficient output Dry pump housing Screaming sound with Fill the pump housing every pump movement with at least 10 liter of... - Page 23 Thermal protection switch of the Turn switch from stars to delta start/delta switch cuts out. more quickly Incorrect direction of rotation Drive unit is overloaded Reverse direction of rotation WARNING If appear some pump defect and cannot find fault immediately contact Uprent technical department...