Configuring Privacy Mask - HIKVISION DS-2AE7230T User Manual

User Manual of HD-TVI Speed Dome
 Contrast
Contrast is the degree of difference between the darker and lighter parts of the image.
The contrast function is supported by certain camera model series.
 HLC
Set the value of HLC to brighten the darker area and weaken the highlight area of the image. The
greater the value is, the stronger the effect will be.
The HLC function is supported by certain camera model series.
 Sharpness Compensation
Set the value of SHARPNESS COMP to automatically adjust the sharpness of the image to get a clear
image. The greater the value is, the stronger the effect will be.
Task 13: Configure the defog parameters.
When there is fog in the image, you can enable this function to get clear image.

3.3.4 Configuring Privacy Mask

Purpose:
Privacy mask enables you to cover certain areas on the live video from being live viewed and
recorded. The masked areas can move with the panning/tilting movements and automatically adjust
the size as the lens zooming in/out.
Steps:
1. Move the cursor to enter the privacy mask configuration submenu:
MAIN MENUS > DOME SETTINGS > PRIVACY MASK
2. Choose the privacy mask number:
Steps:
(1) Move the cursor to MASK NO. and click IRIS+ to enter the editing mode.
© Hikvision
Lo-Call 1890 866 900
PRIVACY MASK
MASK NO.
MASK STATUS
SET MASK
DELETE MASK
BACK
Figure 3-8 Privacy Mask Configuration Menu
www.cctvireland.ie
1
OFF
EXIT
hikvision@cctvireland.ie
18