D.3.3: Wiring From Acc-25/50Zs Or Acc-25/50Zst To Ms-9200(E) - Honeywell Fire-Lite Alarms ACC-25/50 Instruction Manual

Programmed Activation by FACP
D.3.3 Wiring From ACC-25/50ZS or ACC-25/50ZST to MS-9200(E)
The MS-9200(E) FACP communicates with the ACC-25/50ZS or ACC-25/50ZST over the ACS
annunciator link. Wiring must be connected between the ACS Terminal TB5 on the MS-9200(E)
and ACS Terminal TB1 on the ACC-ZPMK Zone Page Module installed on the ACC-25/50ZS/T
panel.
124
Addressable Control Modules or Multimodule
ACC-25/50ZS/T
main circuit board
ALL-CALL
POWER ON
SYSTEM
AUDIO ON/OFF
TROUBLE
MESSAGE
MESSAGE 1
TROUBLE
GENERATOR
TONE
MESSAGE 2
GENERATOR
TROUBLE
MICROPHONE
MESSAGE 3
TROUBLE
RECORD
MESSAGE 4
PLAYBACK
TROUBLE
MESSAGE 5
SILENCE
ACC-5/50ZS/T
Keypad
MS-9200(E)
Figure D.5 ACS Connection for MS-9200(E) to ACC-ZPMK
to other ACS devices
located down stream
Address 01
ACC-ZPMK
Set S2=1
Set S3=0
Audio Command Center Series Manual — P/N 51889:E1 6/8/2010
MS-9200(E)
SLC Loop
ACS
TB5