SPORTS AFIELD SA-HD5-BIO Instruction Manual page 8

5. PLACEMENT AND MOUNTING YOUR VAULT (Continued)
Planning Your Space
This vault is intended to be mounted under a surface of your choice. Some possibilities
include under your desk, under a bench, under a cabinet or any other location that is
convenient for you. Before beginning the process, take a moment to review the size of
your vault and evaluate that you will have enough space for the drawer to drop open.
3 "
3/4
In order to mount the vault flush to the edge of your desk or desired surface, use
the provided template and complete the following steps for mounting. Keep in
mind, when the vault drawer is fully open it will extend 6" beyond the edge of your
desk so that you may easily and quickly access the contents.
Using the Provided Template
The provided screws are designed for mounting to surfaces of 1/2 inch or thicker.
If your surface is less than 1/2 inch thick, different mounting hardware is needed.
Align the template with the front edge
1.
of your or chosen surface. Use a pencil
to mark the location of the (4) holes.
2. Drill pilot holes on marked locations.
3. Line up the mounting plate with
pilot holes and hold in position.
4.
While continuing to hold, using a
screwdriver or power drill, fasten
the plate to the surface using
provided screws.
14"
12"
FRONT EDGE OF DESK OR CHOSEN SURFACE
NOTE: THIS VAULT REQUIRES
9" OF CLEARANCE.
WARNING: TO AVOID DANGER
9"
OF THE DEVICE CLOSING ON
YOUR FINGER, USE CARE WHEN
HANDLING THE VAULT SIDES.
TEMPLATE
18"
7