Clearing All Recorded Fingerprints; Silent Entry Mode; Loading Your Vault; Maintaining Hinges And Internal Mechanisms - SPORTS AFIELD SA-HD5-BIO Instruction Manual

Drop action biometric security vault
Hide thumbs Also See for SA-HD5-BIO:
Table of Contents

Advertisement

11. CLEARING ALL RECORDED FINGERPRINTS

First, hold the reset button. The
scanner will flash green light and
make one sound. After holding for
5 seconds, the scanner will flash
green and sound two times.
NOTE:
If 100 max fingerprints have already been programmed
and beep 5 times. We recommend clearing all programmed fingerprints and starting the
programming process over.

12. SILENT ENTRY MODE

13. LOADING YOUR VAULT

Store ammunition separately from valuables.
1.
2.
Don't put anything in your vault that will put pressure against the door when closed.
Be aware that the drawer can get jammed when large or bulky items are stored
3.
exceeding the maximum height of 2

14. MAINTAINING HINGES AND INTERNAL MECHANISMS

The hinges and internal locking mechanism are permanently lubricated, thus
needing no maintenance. Opening the door panel of your vault may void your
warranty. Always consult our customer service experts prior to doing so.
To initiate silent entry mode, hold a programmed
finger on the scanner for 5 seconds beyond your
fingerprint being accepted. The green indicator
ring will turn off and back on, but will not beep,
indicating you are now in silent entry mode.
You will not hear any sounds for any functions
while the vault is in silent entry mode.
To turn the sound back on, hold a programmed
finger on the scanner for 5 seconds beyond your
fingerprint being accepted. The green indicator
ring will turn off and back on and will beep once
indicating you are no longer in silent entry mode.
to 3 inches.
1/2
HOLD DOWN THE
RESET BUTTON
GREEN
LIGHT
2
x
indicator ring will flash 5 times
2
x
13

Advertisement

Table of Contents
loading

Table of Contents