FLIR A6 Series User Manual page 43

14 Technical data
Measurement analysis
Atmospheric transmission correction
Optics transmission correction
Emissivity correction
Reflected apparent temperature correction
External optics/windows correction
Measurement corrections
USB
USB
USB, standard
USB, connector type
USB, communication
USB, image streaming
USB, protocols
Ethernet
Ethernet
Ethernet, type
Ethernet, standard
Ethernet, connector type
Ethernet, communication
Ethernet, image streaming
Ethernet, protocols
Digital input/output
Digital input, purpose
Digital input
Digital output, purpose
Digital output
Digital I/O, isolation voltage
#T559950; r. AE/83475/83477; en-US
Automatic, based on inputs for distance, atmos-
pheric temperature and relative humidity
Automatic, based on signals from internal sensors
Variable from 0.01 to 1.0
Automatic, based on input of reflected
temperature
Automatic, based on input of optics/window trans-
mission and temperature
Global object parameters
• Control and image
USB 2 HS
• USB Mini-B
TCP/IP socket-based FLIR proprietary
16-bit 640 × 480 pixels @ 25 Hz
• Signal linear
• Temperature linear
• Radiometric
TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP,
ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour),
uPnP
Control and image
Gigabit Ethernet
IEEE 802.3
RJ-45
TCP/IP socket-based FLIR proprietary and GenI-
Cam protocol
16-bit 640 × 480 pixels @ 50 Hz
16-bit 640 × 240 pixels @ 100 Hz
16-bit 640 × 120 pixels @ 200 Hz
• Signal linear
• Temperature linear
• Radiometric
GigE Vision and GenICam compatible
TCP, UDP, SNTP, RTSP, RTP, HTTP, ICMP, IGMP,
ftp, SMTP, SMB (CIFS), DHCP, MDNS (Bonjour),
uPnP
Image tag (start, stop, general), Image flow con-
trol, (stream on/off), Input ext. device (program-
matically read)
2 opto-isolated, 0–1.5 V = low, 3–25 V = high
Output to ext. device (programmatically set)
2 opto-isolated, ON = supply (max. 100 mA), OFF
= open
500 VRMS
39