IBM TS2900 Manual page 37

To add, modify, or remove users that are able to access the library with the Web User Interface:
1. In the Configure Library menu in the left navigation pane of the Web User Interface, click User Access.
2. To add, modify, or remove a user account, follow the steps:
Add a user account:
Click Add
Figure 2. Add User dialog box
Enter the User Name and Password into the dialog box and assign the user's role. Re-enter password to Confirm.
Select one of the following from the Role menu:
User - User access permission allows users to monitor the library, but not to complete functions that affect the library.
Superuser - Superuser access permission allows users to operate the physical and logical library, but not to change configuration settings.
Administrator - Administrator access permission allows users to complete tape library functions and change configuration settings.
Service - Service access permission allows users to complete tape library functions and change configuration settings. In addition, service
access permission allows the use of diagnostic tools to help identify and resolve library and drive problems.
Click Submit to save the new user.
Note: A new user's Password status is set to Expired. A new user is presented with a Login failure message and given the opportunity to create a new
password.
Modify a user account:
Observe the Password status of the user:
Available: The password is available to be changed.
Expired: The maximum password age was exceeded. The password is now invalid.
Unchangeable: The minimum password age was not exceeded. You cannot change the password.
Locked: The maximum number of failed login attempts for the account was exceeded.
Note: An administrator must unlock the account by modifying the account and entering a new password. The Password status changes to
Expired.
Click Modify next to the User Name of the account.
Figure 3. Modify user
Enter and confirm a new password (see
Select one of the following from the Role menu:
User - User access permission allows users to monitor the library, but not to complete functions that affect the library.
Superuser - Superuser access permission allows users to operate the physical and logical library, but not to change configuration settings.
Administrator - Administrator access permission allows users to complete tape library functions and change configuration settings.
32 TS2900 Tape Autoloader
Configuring Password Rules Settings).