Table of Contents
Advertisement
3. Hood Installation
(3 choices depending on framing choice)
A. Back Installation
Note: Use only keyholes and holes shown in
black, as illustrated below, and on the
sketches provided.
Keyholes provided for easy installa-
tion. These should all be used.
Optional holes provided only for
stronger installation when necessary.
1.
Mark the location of the 5 installation
screws (keyholes) on the wood panel.
2.
Do not tighten the installation screws
(3/4") down. The hood can be placed on
them before tightening.
3.
Insert the electrical wire (power supply)
in the hole, ensuring the wire clamp
connector is in place.
4.
Insert the screw heads inside the key-
holes of the hood.
5.
Move down the hood and insert the
screws into the slot of the keyholes.
6.
Tighten the five screws to attach the
hood firmly on the wood panel.
7.
Install (only if necessary) 2 or 4 addi-
tional screws at the locations shown on
the sketch. The numbers of additional
screws depend on the size of the hood.
1 -1 /4 "
30"
FRO NT VIEW
3 /4 "
1 -1 /4 "
1 3 -5 /8 "
Residential Wall Mount Hood
wire clamp
connector
3
4
6
1 -1 /4 "
all other m odels
FRO NT VIEW
3 /4 "
1 -1 /4 "
1 3 -5 /8 "
9
Hide quick links:
Advertisement
Table of Contents
