Table of Contents
Advertisement
B. Strip Installation
Note: Use only keyholes and holes shown in
black, as illustrated below, and on the
sketches provided.
Keyholes provided for easy installa-
tion. These should all be used.
Optional holes provided only for
stronger installation when necessary.
1.
Install the two screws (3/4") in the wall
anchors. Do not tighten the installation
screws down so the hood can be placed
on them before tightening.
2.
Insert the electrical wire (power supply)
in the hole, ensuring the wire clamp
connector is in place.
3.
Insert the screw heads inside the key-
holes of the hood. Hold the hood with a
slight angle to allow clearance space
from the mounting strip.
4.
Move down the hood and insert the
screws into the slot of the keyholes.
5.
Pivot the hood to insert the wood-
mounting strip inside the back cavity of
the hood. Continue to hold the hood
during this operation.
6.
Tighten the screws (4 or 6 depending on
hood size) so the hood is firmly attached
to the wood mounting strip.
7.
Firmly tighten the two screws on lower
part of the hood to secure the hood on
the wall.
1-5/8"
1"
# 3400 / # 3410 / # 3420
1-1/4"
FR O NT VIEW
1"
13-5/8"
1-1/4"
Residential Wall Mount Hood
w o o d m o u n tin g s trip
w a ll a n c h o r
wire clamp
connector
2
b ac k c a v ity
5
3
w ire c la m p
6
7
4
1
10
Hide quick links:
Advertisement
Table of Contents
