Electrical Connections; Heat Lamp - Heartland 3400 User Manual

Residential Wall Mount Hood

7. Electrical Connections

WARNING
Risk of electrical shock. Electrical wiring must be done by qualified personnel in accordance
with all applicable codes and standards. Before connecting wires, switch power off at service
panel and lock service disconnecting means to prevent power to be switched on accidentally.
Run power cable to installation location. Remove wiring cover, install wire clamp, insert cable in hood
through wire clamp and secure by tightening the wire clamp.
Connect cable into wiring box, located on rough-in plate, using wire nuts.
Connect wires as follows: BLACK to BLACK, WHITE to WHITE and GROUND wire under ground
screw. Reinstall wiring cover
Ground Screw
8. Heat Lamps
The heat lamps required are 120V, 175W max, infrared bulbs. (120V,1R 175W, PAR 38)
You can use white halogen lights if warming shelves are not used. (120V, 90W, PAR 38)
Install the lamps by rotating them clockswise into their socket holder.
Heat lamps are not included with Hood and not available from Heartland Appliances.
14