Table of Contents
Advertisement
C. Top Installation
Note: Use only keyholes and holes shown in
black, as illustrated below, and on the
sketches provided.
Keyholes provided for easy installa-
tion. These should all be used.
Optional holes provided only for
stronger installation when necessary.
1.
Mark location of the 4-installation
screws (keyholes) on the top wood
frame.
2.
Do not tighten the installation screws
(3/4") down. The hood can be placed on
them before tightening.
3.
Insert the electrical wire (power supply)
in the drywall hole.
4.
Insert the electrical wire in the hole of
the hood, ensuring the wire clamp
connector is in place.
5.
Insert the screw heads inside the key-
holes of the hood.
6.
Push the hood to the wall and insert the
screws into the slot of the keyholes.
7.
Tighten the four screws so the hood is
firmly attached to the top wood frame.
8.
Install additional screws at the location
shown on the sketch depending on
number of optional 2" X 4"s previously
installed.
1-1/4 "
TO P V IE W
3 6" - 4 2 "
1-1/4 "
TO P V IE W
6-3/4 "
10-5/8"
3 0"
1-1/4 "
1-5/8 "
10-5/8"
1-1/4 "
Residential Wall Mount Hood
1
b o t t o m v ie w
3
2
wire clamp
connector
6
7
8
b o t t o m v i e w
11
Hide quick links:
Advertisement
Table of Contents
