Function And Control; Remote Controller Introduction - Gree GWH09ACC-K6DNA1F/I Service Manual

6. Function and Control

6.1 Remote Controller Introduction

Buttons on remote controller
Introduction for icons on display screen
Temp.
display type
30
I feel
Set fan speed
Turbo mode
Send signal
Auto mode
Cool mode
Dry mode
Fan mode
Heat mode
Sleep mode
8℃ heating function
Health mode
Scavenging function
Quiet
X-FAN function
Set temp.
Indoor ambient
temp.
Outdoor ambient
temp.
Clock
Set temperature
WiFi function
Set time
TIMER ON / TIMER OFF
Light
Left & right swing
Up & down swing
Child lock
Introduction for buttons on remote controller
Note:
● This is a general use remote controller. It could be used for
the air conditioner with multifunction. For the functions which
the model doesn't have, if press the corresponding button on
the remote controller, the unit will keep the original running
status.
● After putting through the power, the air conditioner will give
out a sound. Power indicator "
operate the air conditioner by using remote controller.
● Under on status, pressing the button on the remote
controller, the signal icon "
controller will blink once and the air condition-er will give out
a "di" sound, which means the signal has been sent to the air
conditioner.
● As for the models with functions of WiFi or wired controller,
the indoor unit must has been controlled by standard remote
controller under auto mode first, and then the function of
adjustable temperature under auto mode can be realized by APP
or the wired controller.
● This remote controller can adjust the temperature under auto
mode. When matching with the unit which is without the function
of adjustable temperature under auto mode, the set temperature
under auto mode may be invalid, or the displayed set temperature
on the unit is not same as that on the remote controller under
auto mode.
button
Press this button to turn on the unit. Press this button again to
turn off the unit.
button
Press this button to select your required operation mode.
AUTO COOLD
● When selecting auto mode, air conditioner will operate
automatically according to the sensed temperature. Set
temperature can't be adjusted and will not be displayed as well.
Press "FAN" button can adjust fan speed. Press "
button can adjust fan blowing angle.
● After selecting cool mode, air conditioner will operate under
cool mode. Press "▲" or "▼" button to adjust set temperature.
Press "FAN" button to adjust fan speed. Press "
to adjust fan blowing angle.
● When selecting dry mode, the air conditioner operates at low
speed under dry mode. Under dry mode, fan speed can't be
adjusted.
Press " " / " " button to adjust fan blowing angle.
● When selecting fan mode, the air conditioner will only blow
fan, no cooling and no heating. Press "FAN" button to adjust fan
speed. Press " " / " " button to adjust fan blowing angle.
● When selecting heat mode, the air conditioner operates under
heat mode. Press "▲" or "▼" button to adjust set temperature.
Press "FAN" button to adjust fan speed. Press "
to adjust fan blowing angle.
" is ON. After that, you can
" on the display of remote
HEAT
RY FAN
" / "
" / " " button
" / " " button
Technical Information
"