Gree GWH09ACC-K6DNA1F/I Service Manual page 96

Step
8.Remove evaporator assy
a Remove 3 screws fixing evaporator assy.
b
At the back of the unit, remove the screw of the
connection pipe clamp and then remove the
connection pipe clamp.
c
First remove the left side of evaporator from the
groove of bottom shell and then remove the right
side from the clasp on the bottom shell.
Adjust the position of connection pipe on evaporator
slightly and then lift the evaporator upwards to
remove it.
9.Remove motor and cross flow blade
Remove the screws fixing motor clamp and then
a
remove the motor clamp.
Installation and Maintenance
Procedure
Screw
Connection pipe clamp
Groove
Motor clasp
Screws
Screws
Clasp
93