Gree GWH09ACC-K6DNA1F/I Service Manual page 111

Step
10. Remove 4-way valve assy
Unsolder the welding joints connecting the 4-way valve
assy, remove the 4-way valve.
Note:
Before unsoldering the welding joint, wrap the 4-way
valve with a wet cloth completely to avoid damage to
the valve caused by high temperature.
11. Remove axial flow fan
Remove the nut on the fan and then remove the axial
flow fan.
12. Remove motor
Remove the screws fixing the motor and then remove
the motor.
108
Procedure
axial flow fan
motor
4-way valve assy
Installation and Maintenance