Table of Contents
Advertisement
Cleaning agent
en
Time
After the appliance has been connected to the mains
for the first time or after an extended power cut, three
zeros and , flash in the display.
Press the x and y buttons.
1.
Use the @ and A buttons to set the current time.
2.
After a few seconds, the change is adopted.
Changing the time
No other time-setting option should be set. By
Note:
pressing x and y simultaneously, the time-setting
options that are already programmed will be cancelled.
Press the x and y buttons.
1.
A dot flashes in the centre of the display.
Use the @ or A button to change the time.
2.
After a few seconds, the time that has been set is
adopted.
Changing the audible signal
The audible signal can be set to three levels. To do this,
press the A button until the desired signal is set.
18
DCleaning agent
With good care and cleaning, your appliance will retain
C l e a n i n g a g e n t
its appearance and remain fully functioning for a long
time to come. We will explain here how you should
correctly care for and clean your appliance.
:
Warning – Risk of electric shock!
Do not use any high-pressure cleaners or steam
cleaners, which can result in an electric shock.
:
Warning – Risk of burns!
The appliance becomes very hot. Never touch the
interior surfaces of the cooking compartment or the
heating elements. Always allow the appliance to cool
down. Keep children at a safe distance.
Suitable cleaning agents
Observe the following information to ensure that the
different surfaces are not damaged by using the wrong
type of cleaning agent.
Do not use any of the following
on the hob:
Undiluted washing-up liquid or dishwasher
■
detergent,
Abrasive materials, scouring sponges,
■
Aggressive cleaners such as oven spray or stain
■
removers,
High-pressure cleaners or steam jet cleaners.
■
Do not use any of the following
on the oven:
Any harsh or abrasive cleaning agents,
■
Cleaning agents with a high concentration of
■
alcohol,
Hard scouring pads or sponges,
■
High-pressure cleaners or steam cleaners.
■
Wash new sponge cloths thoroughly before use.
:
Warning – Risk of burns!
The appliance becomes very hot. Never touch the
interior surfaces of the cooking compartment or the
heating elements. Always allow the appliance to cool
down. Keep children at a safe distance.
Area
Cleaning
Appliance exte-
Hot soapy water:
rior
Clean with a dish cloth and then dry with a soft
cloth. Do not use glass cleaner or a glass scraper.
Stainless steel
Hot soapy water:
front
Clean with a dish cloth and then dry with a soft
cloth.
Remove flecks of limescale, grease, starch and
albumin (e.g. egg white) immediately. Corrosion
can form under such flecks.
Special stainless steel cleaning products suitable
for hot surfaces are available from our after-sales
service or from specialist retailers. Apply a very
thin layer of the cleaning product with a soft cloth.
Advertisement
Table of Contents
