Adjusting The Airflow Direction - Daikin FTXF20W1VMA Operation Manual

Basic Operation

Adjusting the Airflow Direction

NOTE
Notes on airflow direction setting
• The movable range of the flaps varies according to the operation mode.
• The flaps will stop at the upper position when the airflow rate is changed to low during
the up and down swing setting.
11
You can adjust the airflow direction to increase your comfort.
ATTENTION
• Always use a remote controller to adjust the angle of the flaps.
- If you attempt to move the flaps forcibly by hand when they are swinging, the mechanism may be damaged.
• Be careful when adjusting the louvres.
- Inside the air outlet, a fan is rotating at a high speed.
Auto swing
For up and down airflow direction
1. Press .
• " " appears on the LCD.
• The flaps (horizontal blade) will begin to swing.
2. If you want to stop the movement of the flaps, press
again when the flaps reach the desired position.
Manual adjustment
Hold the knobs and move the louvres (vertical blades)
to the desired position.
• There are knobs in 3 places.
For right and left airflow direction
Movable range of the flaps
FAN ONLY
Knobs
COOL / DRY
HEAT