Software Upgrade; U-Disk Preparation - Ribao BC-40 User Manual

BC-40 User Manual V1.2

9. Software Upgrade

U-disk upgrade method is adopted for the software upgrade of this product.

9.1 U-disk Preparation

Please insert the U-disk into the computer and create a new folder named "GIN" in the root
directory of the U-disk. Put the upgrade software ********* GIN (the file with the suffix.GIN) into
the "GIN" folder.

9.2 Software Upgrade

1）Insert the U-disk into the USB interface of the machine when the machine is off, as shown in Figure 97
below:
2）Turn on the power of the machine, and the software in the U-disk is automatically read by the machine
for upgrading. The upgrade interface as shown in Figure 98 appears. After the software upgrade is
successful, the machine will conduct self-check and enter the main interface of counting, as shown in
Figure 99 below:
3）The machine automatically enters the main interface, so the software upgrade of machine is completed.
Figure 98
Figure 97
45
USB interface
Figure 99