Table of Contents
Advertisement
BC-40 User Manual V1.0
3. Maintenance Instruction
3.1 Software Upgrade
3.1.1 U-disk Preparation
1) The software upgrade of this product adopts the U-disk upgrade method.
2) Please plug the U-disk into your PC first, and create a new folder named "GIN" at the bottom of the
root directory of the U-disk, as shown in Figure 73 below.
3) Please extract the application software in .rar or .zip format provided by our company (e.g. BC40 _
GLImage.rar) and get the application software with the suffix ".GIN" (e.g. BC40_GLImage.GIN). GIN"
format (e.g.BC40_GLImage.GIN).
4) Copy the application in ".GIN" format to the bottom of the folder named "GIN" in the root directory of
the USB flash drive, as shown in Figure 74 below.
Special reminder: Please do not modify the name or suffix name (i.e. .GIN) of the application software,
otherwise the machine will not recognize the software in the USB flash drive, resulting in software
upgrade failure.
Figure 73
Figure 74
35
Advertisement
Table of Contents
