Billion BiPAC 4700AZ User Manual page 94

How to use Hotspot:
Example 1: Using Built-in UAM server
1. Login to the LTE Router and move to Configuration > Interface Setup > Wirelss to set the
SSID1(hotspot is running on SSID1(WLAN1)). Change SSID to Billion-Hotspot and set Security Type
to Open.
2. Move to Configuration > Hotspot > General Setting to set Hotspot Interface, Captive Portal,
Authentication and Session Control Setting.
Here the login mode is Authentication, Captive Portal is Built-in UAM Server and Authentication
Method is RADIUS for authtication.
90