Structure Of Safety Information - Bosch Rexroth SMART Flex Effector Manual

8
Additional materials available to order separately
• Material numbers (flange cover)
R124000010 ISO 9409-1 50-4-M6
o
o R124000011 ISO 9409-1 40-4-M6
o R124000012 ISO 9409-1 31.5-4-M5
R124000013 Blank
o
• Optional: Material numbers (adapter plate):
R124000020 ISO 9409-1 50-4-M6
o
o R124000021 ISO 9409-1 40-4-M6
o R124000022 Blank
This documentation is intended for assembly personnel and service technicians.
This documentation contains important information for the proper and safe
installation and commissioning of the product.
 This documentation, especially the section "Safety instructions", is to be read
completely before working with the product.
1.2

Structure of safety information

Hazard classification
The hazards that can occur at the machine are divided into the following classes:
• Danger
• Warning
• Caution
• Caution
Danger
This warning notice indicates a hazard with high risk. If the safety regulations are not observed, there
is a risk of death or severe injury.
Type and source of hazard
Hazard consequence
 Remedy
en
About this documentation
Caution
Danger
1